• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>DODGE Bearing>3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings

  • 3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings
  • 3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings
  • 3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings
  • 3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings
  • 3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings
  • 3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings

DODGE P4B217-USAF-085MTT MODELS

Need a CAD or 3D Model?

What is P4B217-USAF-085MTT bearing interchange？
Contact NowWhatsAppBe Our Agent

3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings

category

DODGE Bearing

DODGE P4B217-USAF-085MTT SPECIFICATIONS

  • How do I place an EMERGENCY order for SCHAEFFLER GROUP Manufacturer Name a 3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings that I want to pick up 3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter at a Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. our store?

  • DODGE

  • P4B217-USAF-085MTT

  • 76.0 LB
  • Flange Mount
  • Right Hand (CW)
  • 3525V30A21-11AA22R
  • 3
  • Flange
  • N/A
  • Standard Pilot
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

DODGE Dimensions

  • 1.375 in
  • 14 Tooth Splined
  • 3525V
  • 2 5/16 in
  • Buna-N
  • 1800
  • 1.055 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 1800
  • 1800
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.25 in
  • 1.247 in
  • 1.06 in
  • 1.05 in
  • N/A
  • 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm
  • 3525V30A21-11AA22R
  • 2500
  • 2500
  • 31.5
  • 45
  • N/A
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 in Code 61
  • 1 1/4 in Code 61
  • 4.1
  • 5.9

DODGE P4B217-USAF-085MTT 3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings Compare similar products

Cross reference 3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings

No.BrandDdBNounSealsWeightUNSPSCMaterial
P2B217-USAF-085MTTDODGE5.391 Inch | 136.931 Millimeter3.346 Inch | 85 Millimeter3.74 Inch | 95 MillimeterBearingTriple Tect21.18831171511 -
P4B217-USAF-085MTTDODGE5.391 Inch | 136.931 Millimeter3.346 Inch | 85 Millimeter3.74 Inch | 95 MillimeterBearingTriple Tect20.10831171511 -
P4B217-USAF-085MTTDN MODDODGE - - - - - - - -
HR4085T+[217-3000/1]LTHK - - - - - - - Carbon Steel
HR4085T+[217-3000/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]THK - - - - - - - Carbon Steel
HR4085T+[217-3000/1]L[H,​P,​SP,​UP]THK - - - - - - - Carbon Steel
HR4085T+[217-3000/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)]THK - - - - - - - Carbon Steel
HR4085T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[217-3000/1]LTHK - - - - - - - Carbon Steel
HR4085T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[217-3000/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]THK - - - - - - - Carbon Steel
HR4085T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[217-3000/1]L[H,​P,​SP,​UP]THK - - - - - - - Carbon Steel
HR4085T[F(AP-C),​F(AP-CF),​F(AP-HC)]+[217-3000/1]L[H,​P,​SP,​UP][F(AP-C),​F(AP-CF),​F(AP-HC)]THK - - - - - - - Carbon Steel

 

DODGE EFC-IP-108LE Flange Block BearingsMinor Diameter:76.0 LB; Pilot Type:Flange Mount; Shaft Dia.:Right Hand (CW); Port Type:3525V30A21-11AA22R; Seal Material:3; Weight:Flange; Cover End Pressure [Max:N/A; Major Diameter [Min:Standard Pilot; Shaft Length:1.375 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A21-11AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5.9;
DODGE FB-SC-104S-NL Flange Block BearingsPressure Port Size, Shaft End:76.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Model No.:Right Hand (CW); Spline Description:3525V30A21-11AA22R; Major Diameter [Max:3; Port Orientation - Cover End:Flange; Shaft Seal Type:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Mounting:1.375 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A21-11AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5.9;
DODGE INS-S2-111R Insert Bearings Spherical ODShaft End Pressure [Max:76.0 LB; Shaft End Flow @ RPM:Flange Mount; Spline Description:Right Hand (CW); Max. RPM [Max:3525V30A21-11AA22R; Minor Diameter:3; Pressure Port Size, Shaft End:Flange; Cover End Pressure [Max:N/A; Mounting:Standard Pilot; Port Size:1.375 in; Shaft Dia.:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A21-11AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5.9;
3 Inch | 76.2 Millimeter x 3.5 Inch | 88.9 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE EP2B-IP-300LE Pillow Block BearingsGPM @ 1,800 rpm, Cover End:76.0 LB; Pressure Port Size, Cover End:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Shaft End Pressure [Max:3525V30A21-11AA22R; Manufacturer Part No.:3; Displacement Cover End (cu in/revolution):Flange; Major Diameter [Min:N/A; Spline Description:Standard Pilot; Max. RPM [Max:1.375 in; Pilot Type:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A21-11AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5.9;
4 Inch | 101.6 Millimeter x 4.703 Inch | 119.456 Millimeter x 4.25 Inch | 107.95 Millimeter DODGE SP2B-IP-400RE Pillow Block BearingsSpline Description:76.0 LB; Minor Diameter [Min:Flange Mount; Rotation:Right Hand (CW); Pump Series:3525V30A21-11AA22R; Pressure Port Size, Shaft End:3; Pressure Port Size, Cover End:Flange; Model No.:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Controlled Flow Rate:1.375 in; Seal Material:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A21-11AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5.9;
DODGE FB-DL-012 Flange Block BearingsGPM @ 1,800 rpm, Cover End:76.0 LB; Shaft End Pressure [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Minor Diameter:3525V30A21-11AA22R; Manufacturer Part No.:3; Cover End Flow @ RPM:Flange; Displacement Cover End (cu in/revolution):N/A; Max. RPM [Max:Standard Pilot; Minor Diameter [Min:1.375 in; Shaft Dia.:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A21-11AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5.9;
DODGE WSTU-SC-010 Take Up Unit BearingsPort Size:76.0 LB; Shaft End RPM [Max:Flange Mount; Rotation:Right Hand (CW); Pressure Port Size, Cover End:3525V30A21-11AA22R; Cover End Flow @ RPM:3; Cover End Pressure [Max:Flange; Model No.:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Relief Valve Setting:1.375 in; Shaft Dia.:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A21-11AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5.9;
2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block BearingsPressure Port Size, Cover End:76.0 LB; Shaft Length:Flange Mount; Mounting:Right Hand (CW); Seal Material:3525V30A21-11AA22R; Major Diameter [Max:3; Port Orientation - Cover End:Flange; Max. RPM [Max:N/A; Shaft Key:Standard Pilot; Port Orientation - Shaft End:1.375 in; Pilot Type:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A21-11AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5.9;
1.438 Inch | 36.525 Millimeter x 2.547 Inch | 64.694 Millimeter x 2.375 Inch | 60.325 Millimeter DODGE P2B-K-107R Pillow Block BearingsShaft End Flow @ RPM:76.0 LB; Shaft End Pressure [Max:Flange Mount; Shaft Key:Right Hand (CW); Pressure Port Size, Cover End:3525V30A21-11AA22R; Minor Diameter [Max:3; Displacement Cover End (cu in/revolution):Flange; Port Type:N/A; Mounting Flange:Standard Pilot; Shaft Seal Type:1.375 in; Port Orientation - Cover End:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A21-11AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5.9;
DODGE FC-SCM-208 Flange Block BearingsMinor Diameter [Max:76.0 LB; Shaft Type:Flange Mount; Shaft Key:Right Hand (CW); Shaft End RPM [Max:3525V30A21-11AA22R; Controlled Flow Rate:3; Cover End Flow @ RPM:Flange; Pressure Port Size, Shaft End:N/A; Mounting:Standard Pilot; Port Size:1.375 in; Weight:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A21-11AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5.9;

 

Mounted Bearings

For more than 120 years, Dodge has been one of the leading suppliers of power transmission products and system components in the world. Today we utilize 

Mounted bearings | ABB

Fully assembled bearing ready for industrial use. Dodge® bearings offer innovative designs; a wide range of shaft attachment methods, rolling elements, housings, 

Mounted Ball Bearings

Dodge mounted ball bearings are available in any of our proven locking devices: our exclusive 65° set screw locking system, eccentric locking collars, D-Lok™ 

Dodge

Dodge Product Offering. Mounted Bearings · Mounted Ball Bearings ... Hardy Pro-Air provides success with Dodge Raptor couplings. Hardy Pro-Air Systems 

Dodge - P2BE207R - Motion Industries

Dodge P2BE207R. Pillow Block Roller Bearing Unit - 2.4375 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion 

 

3.346 Inch | 85 Millimeter x 5.391 Inch | 136.931 Millimeter x 3.74 Inch | 95 Millimeter DODGE P4B217-USAF-085MTT Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

DODGE P4B217-USAF-085MTT Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

DODGE Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed DODGE P4B217-USAF-085MTT Also Viewed

  • DODGE FB-DL-012 Flange Block Bearings
  • DODGE WSTU-SC-010 Take Up Unit Bearings
  • DODGE EFC-IP-108LE Flange Block Bearings
  • 2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block Bearings
  • DODGE FB-SC-104S-NL Flange Block Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2026 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us