• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>LINK BELT Bearing>2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings

  • 2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings
  • 2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings
  • 2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings
  • 2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings
  • 2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings
  • 2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings

LINK BELT PEB224M60FH MODELS

Need a CAD or 3D Model?

What is PEB224M60FH bearing interchange？
Contact NowWhatsAppBe Our Agent

2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings

category

LINK BELT Bearing

LINK BELT PEB224M60FH SPECIFICATIONS

  • 170 255 mm A Million 2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter used 2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings instantly searchable. Shop our large selection of parts based on brand, price, description, and location. Order Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. the LINK BELT Bearing with stock ...

  • LINK BELT

  • PEB224M60FH

  • 30.0 LB
  • Flange Mount
  • Right Hand (CW)
  • V2010-1F9S5S-1DD12
  • 1 1/2
  • Flange
  • 3/16 in
  • N/A
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

LINK BELT Bearing Details

  • 0.875 in
  • Straight w/ Key
  • V2010
  • 2.3125 in
  • Buna-N
  • 2800
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 3000
  • 2800
  • N/A
  • 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm
  • V2010-1F9S5S-1DD12
  • 2500
  • 2500
  • 7.5
  • 13.5
  • N/A
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1
  • 1.81

LINK BELT PEB224M60FH 2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings Customers who bought this item also bought

Cross reference 2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings

No.BrandemdDHZVN
ZR3.25.2240.400-1SPPNISB - 18 mm1944 mm2421 mm147 mm109 mm33 mm48 mm
ZR3.32.2240.400-1SPPNISB - 18 mm1908 mm2458 mm181 mm107 mm39 mm40 mm
VKHB 2247SKF - - 120,000165,000 - - - -
VKHB 2248SKF - - 90,000160,000 - - - -
12Y224VHKOYO - - 19,05 mm34,125 mm - - - -
WS22224-E1-2RSRFAG0,2511,3 kg / Weight120 mm215 mm - - - -
Z-522400.04.DRGLFAG - - 340 mm870 mm - - - -
Z-522401.04.DRGLFAG - - 300 mm780 mm - - - -
22224EAKW33SNR - - 120,000 mm215,000 mm58,000 mm - - -
22224EAW33SNR - - 120,000 mm215,000 mm58,000 mm - - -
22224EMKW33SNR0.25 - 120,000 mm215,000 mm58,000 mm - - -

 

LINK BELT DSB22439H24 Take Up Unit BearingsCover End Pressure [Max:30.0 LB; Shaft End RPM [Max:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Major Diameter [Max:V2010-1F9S5S-1DD12; Major Diameter [Min:1 1/2; Shaft Length:Flange; Weight:3/16 in; Max. RPM [Max:N/A; Minor Diameter [Max:0.875 in; Model No.:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S5S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.81;
LINK BELT FEB22431E Flange Block BearingsShaft End Pressure [Max:30.0 LB; Manufacturer Part No.:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Pressure Port Size, Shaft End:V2010-1F9S5S-1DD12; Shaft End RPM [Max:1 1/2; Minor Diameter [Min:Flange; Shaft Type:3/16 in; Port Orientation - Shaft End:N/A; Shaft End Flow @ RPM:0.875 in; Minor Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S5S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.81;
2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter LINK BELT MU5213TV Cylindrical Roller BearingsMinor Diameter [Max:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Major Diameter [Max:Right Hand (CW); Shaft Type:V2010-1F9S5S-1DD12; Port Orientation - Cover End:1 1/2; Model No.:Flange; Pilot Type:3/16 in; Integral Valve Configuration:N/A; Major Diameter [Min:0.875 in; Spline Description:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S5S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.81;
0.984 Inch | 25 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.437 Inch | 36.5 Millimeter LINK BELT KLPSS2M25 Pillow Block BearingsMinor Diameter [Min:30.0 LB; Cover End Flow @ RPM:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Model No.:V2010-1F9S5S-1DD12; Shaft End Flow @ RPM:1 1/2; Displacement Shaft End (cu in/revolution):Flange; Pilot Type:3/16 in; Shaft Seal Type:N/A; Cover End Pressure [Max:0.875 in; Integral Valve Configuration:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S5S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.81;
1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MU1309TMW106 Cylindrical Roller BearingsCover End Flow @ RPM:30.0 LB; Shaft Seal Type:Flange Mount; Model No.:Right Hand (CW); Rotation:V2010-1F9S5S-1DD12; Relief Valve Setting:1 1/2; Cover End RPM [Max:Flange; Cover End Pressure [Max:3/16 in; Mounting:N/A; Port Size:0.875 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S5S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.81;
LINK BELT FC3U2M65N Flange Block BearingsShaft End RPM [Max:30.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Rotation:Right Hand (CW); Port Orientation - Shaft End:V2010-1F9S5S-1DD12; Minor Diameter [Max:1 1/2; Seal Material:Flange; Max. RPM [Max:3/16 in; Cover End Pressure [Max:N/A; Mounting:0.875 in; Cover End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S5S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.81;
LINK BELT CEU323 Cartridge Unit BearingsGPM @ 1,800 rpm, Shaft End:30.0 LB; Port Orientation - Shaft End:Flange Mount; Port Type:Right Hand (CW); Pump Series:V2010-1F9S5S-1DD12; Pilot Type:1 1/2; Model No.:Flange; Minor Diameter [Min:3/16 in; Mounting Flange:N/A; Shaft End Pressure [Max:0.875 in; Cover End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S5S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.81;
2.559 Inch | 65 Millimeter x 4 Inch | 101.6 Millimeter x 3.126 Inch | 79.4 Millimeter LINK BELT EPB224M65E Pillow Block BearingsManufacturer Part No.:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Model No.:V2010-1F9S5S-1DD12; Cover End RPM [Max:1 1/2; Port Orientation - Shaft End:Flange; Displacement Shaft End (cu in/revolution):3/16 in; Mounting Flange:N/A; Major Diameter [Min:0.875 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S5S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.81;
LINK BELT KFXS212D Flange Block BearingsShaft End Pressure [Max:30.0 LB; Mounting Flange:Flange Mount; Cover End RPM [Max:Right Hand (CW); Major Diameter [Max:V2010-1F9S5S-1DD12; Relief Valve Setting:1 1/2; Port Orientation - Cover End:Flange; Shaft Key:3/16 in; Shaft End RPM [Max:N/A; Shaft Length:0.875 in; Shaft Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S5S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.81;
LINK BELT FC3Y219N Flange Block BearingsDisplacement Cover End (cu in/revolution):30.0 LB; Mounting Flange:Flange Mount; Major Diameter [Min:Right Hand (CW); Shaft Dia.:V2010-1F9S5S-1DD12; Displacement Shaft End (cu in/revolution):1 1/2; Minor Diameter [Min:Flange; Pressure Port Size, Shaft End:3/16 in; Minor Diameter [Max:N/A; Port Size:0.875 in; Pilot Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S5S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):1.81;

 

Link-Belt Spherical Roller Bearings - Bearings | Rexnord

Link-Belt bearings are the workhorse of the bearing industry. Link-Belt's rugged spherical roller bearings perform with outstanding misalignment capabilities, 

Bearings: Ball, Cylindrical, Filament, Sleeve, and Roller

Rexnord bearing brands, Rex, Link-Belt, Duralon and Tuflite Bearings provide performance and quality in spherical & cylindrical roller, ball, sleeve, and filament 

P3U235N Link-Belt Pillow Blocks Ball Bearings - Rexnord

P3U235N Link-Belt 200 Series Standard Duty Pillow Block Ball Bearing 10413991 P3U235N 2 3/16 PILLOWBLK BALL BRG 662327121297

Link-Belt & Rex Bearing Catalog

2 Link-Belt® Spherical Roller Bearing Units. 123. Features & Benefits ... Rex® Roller Bearings represent the continuation of 80 years of bearing technology and 

B440L Link-Belt Bearing Inserts (Unmounted Replacements

B440L Link-Belt B22400 Series Spherical Roller Bearing 10425347 B440L 2 1/2 INSERT ROLLER BRG 793699983784

 

2.362 Inch | 60 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.756 Inch | 70 Millimeter LINK BELT PEB224M60FH Pillow Block Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

LINK BELT PEB224M60FH Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

LINK BELT Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed LINK BELT PEB224M60FH Also Viewed

  • 2.559 Inch | 65 Millimeter x 4 Inch | 101.6 Millimeter x 3.126 Inch | 79.4 Millimeter LINK BELT EPB224M65E Pillow Block Bearings
  • LINK BELT DSB22439H24 Take Up Unit Bearings
  • LINK BELT KFXS212D Flange Block Bearings
  • LINK BELT FC3U2M65N Flange Block Bearings
  • 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MU1309TMW106 Cylindrical Roller Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2026 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us