• 86-13569877658|
  • Request a quote
English
English
Tokimec Vane Pump Co., Ltd.
Tokimec Vane Pump Co., Ltd.

Timken hm926749 Bearing

  REXROTH Piston Pump 18 Displacement   REXROTH Piston Pump 28 Displacement   REXROTH Piston Pump 100 Displacement  
  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Home>Products>SKF Bearing>2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings

  • 2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings
  • 2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings
  • 2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings
  • 2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings
  • 2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings
  • 2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings

SKF 7014 ACD/TBTCVQ602 MODELS

Need a CAD or 3D Model?

What is 7014 ACD/TBTCVQ602 bearing interchange？
Contact NowWhatsAppBe Our Agent

2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings

category

SKF Bearing

SKF 7014 ACD/TBTCVQ602 SPECIFICATIONS

  • 2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings with easy-to-use parts graphics, giving you the ability 2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter to check parts availability, SKF Bearing pricing, examine Non-Expansion Bearin expansion type: remanufactured Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. options.

  • SKF

  • 7014 ACD/TBTCVQ602

  • 75.0 LB
  • Flange Mount
  • Right Hand (CW)
  • 3520V25A11-11CC22R
  • 3
  • Flange
  • N/A
  • Standard Pilot
Tokimec Vane Pump Co., Ltd.

Tokimec Vane Pump Co., Ltd.China

  • Tokimec Vane Pump Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

7014 ACD/TBTCVQ602 Interchange guide

  • 1.375 in
  • 14 Tooth Splined
  • 3520V
  • 2.3125 in
  • Double
  • Buna-N
  • 1800
  • 1.055 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 1800
  • 4.9
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 1.25 in
  • 1.247 in
  • 1.06 in
  • 1.05 in
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3520V25A11-11CC22R
  • 3000
  • 2500
  • 16.5
  • 37.5
  • N/A
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 3/4 in Code 61
  • 1 1/4 in Code 61
  • 2.2

SKF 7014 ACD/TBTCVQ602 SKF Bearing Dimensions

Cross reference 2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings

No.BranddCDTmLWL3
KBL60211NBS60 mm7,65 kN90 mm - - 209 mm3,15 mm -
KBL60211-PPNBS60 mm7,65 kN90 mm - - 209 mm3,15 mm -
6020Ruville - - - - - - - -
6026Ruville - - - - - - - -
6027Ruville - - - - - - - -
RW428602KBC22 mm - 42 mm - - 142 mm46 mm101 mm
T16021KOYO406.4 mm6 470 kN711.2 mm146.05 mm - - - -
VKBA 3602SKF - - - - - - - -
7014Ruville - - - - - - - -
AST090 6025AST60 - 65 - - - - -
RT602INA26,988 mm - 53,988 mm20,625 mm0,224 kg / Weight - - -

 

SKF C2F104SSG Flange Block BearingsMinor Diameter [Min:75.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Cover End RPM [Max:Right Hand (CW); Shaft End Flow @ RPM:3520V25A11-11CC22R; Displacement Shaft End (cu in/revolution):3; Model No.:Flange; Integral Valve Configuration:N/A; Rotation:Standard Pilot; Mounting Flange:1.375 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
SKF 6211 2ZNRJEM Single Row Ball BearingsRotation:75.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Model No.:3520V25A11-11CC22R; Shaft Seal Type:3; Spline Description:Flange; Relief Valve Setting:N/A; Weight:Standard Pilot; Mounting:1.375 in; Max. RPM [Max:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
SKF C2F012SSG Flange Block BearingsPump Series:75.0 LB; Max. RPM [Max:Flange Mount; Minor Diameter [Min:Right Hand (CW); Seal Material:3520V25A11-11CC22R; Mounting Flange:3; Cover End Pressure [Max:Flange; Controlled Flow Rate:N/A; Shaft Key:Standard Pilot; Model No.:1.375 in; Pilot Type:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
SKF 16015/C3 Single Row Ball BearingsShaft End Flow @ RPM:75.0 LB; Minor Diameter:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Mounting Flange:3520V25A11-11CC22R; Rotation:3; Shaft Dia.:Flange; Pressure Port Size, Cover End:N/A; Shaft Length:Standard Pilot; Major Diameter [Min:1.375 in; Displacement Cover End (cu in/revolution):14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
1.969 Inch | 50 Millimeter x 2.835 Inch | 72 Millimeter x 0.472 Inch | 12 Millimeter SKF 71910 CDGA/P4A Precision Ball BearingsPressure Port Size, Cover End:75.0 LB; Port Orientation - Cover End:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Shaft Length:3520V25A11-11CC22R; Minor Diameter [Min:3; Shaft Key:Flange; Cover End Flow @ RPM:N/A; Minor Diameter [Max:Standard Pilot; Displacement Shaft End (cu in/revolution):1.375 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
2.165 Inch | 55 Millimeter x 3.543 Inch | 90 Millimeter x 1.417 Inch | 36 Millimeter SKF 7011 CE/HCDGAVQ126 Angular Contact Ball BearingsPump Series:75.0 LB; Major Diameter [Max:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Displacement Cover End (cu in/revolution):3520V25A11-11CC22R; Port Size:3; Pilot Type:Flange; Shaft End Flow @ RPM:N/A; Minor Diameter [Min:Standard Pilot; Port Orientation - Shaft End:1.375 in; Shaft Type:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
100 mm x 140 mm x 24 mm SKF NCF 2920 CV Cylindrical Roller BearingsShaft Dia.:75.0 LB; Shaft End Flow @ RPM:Flange Mount; Shaft Seal Type:Right Hand (CW); Pressure Port Size, Cover End:3520V25A11-11CC22R; Shaft End Pressure [Max:3; Cover End Pressure [Max:Flange; Port Type:N/A; Shaft Key:Standard Pilot; Major Diameter [Max:1.375 in; Spline Description:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
12.598 Inch | 320 Millimeter x 18.898 Inch | 480 Millimeter x 6.299 Inch | 160 Millimeter SKF 24064 CC/C4W33 Spherical Roller BearingsShaft Dia.:75.0 LB; Integral Valve Configuration:Flange Mount; Model No.:Right Hand (CW); Shaft End Pressure [Max:3520V25A11-11CC22R; Minor Diameter [Min:3; Controlled Flow Rate:Flange; Cover End Pressure [Max:N/A; Pump Series:Standard Pilot; Shaft Length:1.375 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
4.331 Inch | 110 Millimeter x 7.874 Inch | 200 Millimeter x 2.992 Inch | 76 Millimeter SKF 7222 CD/P4ADGB Precision Ball BearingsShaft Key:75.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Cover End RPM [Max:Right Hand (CW); Cover End Pressure [Max:3520V25A11-11CC22R; Displacement Shaft End (cu in/revolution):3; Port Orientation - Cover End:Flange; Port Size:N/A; Minor Diameter [Max:Standard Pilot; Pressure Port Size, Shaft End:1.375 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
SKF 6217 2ZNRJEM Single Row Ball BearingsShaft Type:75.0 LB; Rotation:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Integral Valve Configuration:3520V25A11-11CC22R; Manufacturer Part No.:3; Seal Material:Flange; Max. RPM [Max:N/A; Relief Valve Setting:Standard Pilot; Cover End Pressure [Max:1.375 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;

 

Bearings, units and housings

The application demands and operating conditions of rotating machinery are extremely diverse. To achieve the best performance fit for your application, there 

Bearings, units and housings

SKF started with a bearing, and to this day is still a world leader in the design and manufacture of rolling and plain bearings. Here you will find our full assortment 

SKF Bearing Select - New

Please, use our new online bearing selection tool, SKF Bearing Select*. SKF Bearing Select will replace the SKF Bearing Calculator as well as the current 

SKF Group - Bearings and units Lubrication solutions

NEWS. 2018 January 17, 08:00. Hans Stråberg proposed as new Chairman of the Board of AB SKF. Colleen Repplier proposed as new Board Member

Bearings, Seals, Lubrication, Mechatronics & Services | SKF

SKF is a leading bearing technology provider around rotating equipment since 1907 with experience in over 40 industries. Visit the SKF site to learn more about 

 

2.756 Inch | 70 Millimeter x 4.331 Inch | 110 Millimeter x 2.362 Inch | 60 Millimeter SKF 7014 ACD/TBTCVQ602 Angular Contact Ball Bearings Video

 

Contact Us

Tokimec Vane Pump Co., Ltd.
AddressRm. 05, Floor 9, Wuhan Shenghua Intelligent Technology Integration Bldg., No. 101, Tianyuan Avenue,
Phone(Working Time)86-13569877658
  • Tokimec Vane Pump Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

SKF 7014 ACD/TBTCVQ602 Technical Articles

How do I know if my rear wheel bearings are bad?
Wheel Bearing Warning Signs & Symptoms | Auto Repair BlogMay 14, 2019 — The most common and most easily identifiable symptom of a bad wheel bearing is an audible one. If you notice a grinding or grating noise coming from your wheel or tire,...
How do you calculate tolerance of a bearing?
Fitting tolerance design | Bearings | OILESFitting Tolerance Design. Capable of calculating a fitting for fixing the bearings by press-fitting in a simple manner. Fitting Design. This calculation  How to measure bearing tolerances - SMB...
How do you solve a trig bearing problem?
Trigonometric bearing problem - Mathematics Stack ExchangeTrigonometric bearing problem · trigonometry. I have two trigonometric problems that I solved, however it does not match the answer in the book: Bearings and direction word problems |...

SKF Bearing CATEGORIES

  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
  • REXROTH Piston Pump 140 Displacement
  • REXROTH Piston Pump
  • REXROTH Hand-Directional Valve
  • REXROTH Check Valve
  • REXROTH Compensated Flow Control Valve
  • FAG Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • ISOSTATIC Bearing
  • LINK BELT Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Directional spool valves
  • REXROTH Throttle valves
  • REXROTH Valves
  • REXROTH Check valves
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Pressure relief valve
  • REXROTH Pressure reducing valve
  • 32014 Bearing
  • rexroth a4vg71 Bearing
  • jm205149 Bearing
  • jlm506810 Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed SKF 7014 ACD/TBTCVQ602 Also Viewed

  • SKF 6211 2ZNRJEM Single Row Ball Bearings
  • SKF 16015/C3 Single Row Ball Bearings
  • SKF 6217 2ZNRJEM Single Row Ball Bearings
  • 12.598 Inch | 320 Millimeter x 18.898 Inch | 480 Millimeter x 6.299 Inch | 160 Millimeter SKF 24064 CC/C4W33 Spherical Roller Bearings
  • 1.969 Inch | 50 Millimeter x 2.835 Inch | 72 Millimeter x 0.472 Inch | 12 Millimeter SKF 71910 CDGA/P4A Precision Ball Bearings

Top Products

ISOSTATIC AA-2001-9 Sleeve Bearings SKF 16015/C3 Single Row Ball Bearings REXROTH A10VSO100DR/31R-PPA12N00 Piston Pump 18 Displacement
REXROTH A10VSO28FHD/31R-PPA12N00 Piston Pump 28 Displacement Timken hm926749 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Tokimec Vane Pump Co., Ltd.. Copyright © 2017 - 2026 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 18 Displacement
    • REXROTH Piston Pump 28 Displacement
    • REXROTH Piston Pump 100 Displacement
    • REXROTH Piston Pump 140 Displacement
    • REXROTH Piston Pump
    • REXROTH Hand-Directional Valve
    • REXROTH Check Valve
    • REXROTH Compensated Flow Control Valve
    • FAG Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • ISOSTATIC Bearing
    • LINK BELT Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Directional spool valves
    • REXROTH Throttle valves
    • REXROTH Valves
    • REXROTH Check valves
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Pressure relief valve
    • REXROTH Pressure reducing valve
    • 32014 Bearing
    • rexroth a4vg71 Bearing
    • jm205149 Bearing
    • jlm506810 Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • REXROTH Piston Pump 18 Displacement
  • REXROTH Piston Pump 28 Displacement
  • REXROTH Piston Pump 100 Displacement
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 18 Displacement

REXROTH Piston Pump 28 Displacement

REXROTH Piston Pump 100 Displacement

Contact Us